
Lachant Group
Custom springs and metal parts since 1913
About Lachant Group
Lachant Group is a French family company, founded in 1913, that makes springs and custom metal parts. Its website describes it as a manufacturer of tailor-made parts and a co-development partner for customers, working to a specific specification supplied by each client. Aeronautics is one of the many sectors it serves, alongside automotive, construction, electronics, mechanical engineering, tooling, electrical, food, medical and luxury goods.
What Lachant Group makes
- Compression springs, the most common spring type, used to reduce vibration and shocks and produced in a range of materials and degrees of stiffness
- Torsion springs, each with a hooking solution created for the application
- Traction (extension) springs and shaped wire springs, made by bending wire into forms that can add functions beyond acting as a spring
- Flat springs cut from metal sheet, including Belleville washers, spring washers, clips, housings and contact sheets
- Cold formed and cut metal parts, fixing and connecting elements
- Sub-assemblies used in assembled industrial products, in small, medium and large series
Processes and quality
The group offers heat treatment, including quenching and tempering, to change the hardness, ductility and wear resistance of steels and metal alloys. Surface preparation covers degreasing and a decontamination process, so that machined components are free of grease, oil and chips, which matters in electronics and fluid applications. Laser cutting is also available, which the site presents as well suited to small series because it needs little or no tooling investment. A quality department with measuring and verification tools checks the parts, and the project managers, design office, production and inspection teams work with customers from design through to manufacture.
Investment and environment
Lachant Group is a member of the France 2030 programme and has installed a new cutting and stamping machine, supported by a France 2030 grant. At its Lachant Stamping site in Châteaudun it has started fitting photovoltaic panels intended to cut electricity consumption from the grid and is completing building insulation, as part of a green engagement programme that also covers recycling and energy savings. Regional co-financing from Centre Val de Loire and an ADEME grant support the replacement of old gas heating at one of its buildings.
Events
Lachant Group is listed as an exhibitor at Aeromart Toulouse 2026, Euronaval 2026 and Paris Air Show 2027.
Contact
Lachant Group is listed under Manufacturers and is based in France.
Description from the company’s website. Is this your company? Claim this page to add your services, photos and contact details.
Location
France
Open in maps ↗Shows where Lachant Group exhibits or has exhibited
All aviation events- 3
- events
- 1
- country
- 0
- as sponsor
View eventAeromart Toulouse
Exhibited in 2024. Next edition 1 to 3 December 2026 · Toulouse, France
Exhibitor2024 list; 2026 not published yet
View eventParis Air Show (Salon du Bourget)
Exhibited in 2025. Next edition 14 to 20 June 2027 · Paris, France
Stand Hall 4 B 151 (2025)2025 list; 2027 not published yet
View eventEuronaval
3 to 6 November 2026 · Villepinte, France
Stand 6 E92
From the organisers’ published exhibitor and sponsor lists.
Companies exhibiting at the same events
Directory companies that exhibit at the same shows as Lachant Group, most shared events first.
Event types: Defence and security (1), Other (1), Airshows (1). Browse the calendar
Similar manufacturers

21 Aero
Aircraft Maintenance · United Kingdom
21 Aero is an aerospace manufacturer and aircraft repair business in Warrington, UK. It trades as 21 Aero Limited.
View company
27G-Technology
Manufacturers · Hungary
27G-Technology, also called 27G, is a research and development company based in Hungary. It provides new, cost-effective and easy-to-use solutions for space and special ground applications.
View company
3Axes
Manufacturers · France
3Axes is a French machining company in Château-Thierry that specialises in aluminium profiles and technical metals. It has been based there for more than 30 years.
View company
3D Target
Aviation Consulting · Italy
3D Target is an Italian company based in Castenedolo, in the province of Brescia, that sells and rents surveying and measuring equipment. Its range includes drones, laser scanners, thermal cameras and 360 degree cameras.
View company







