Kelly Manufacturing Company (RC Allen Instruments)
RC Allen flight instruments for general aviation, made in Wichita, Kansas
About Kelly Manufacturing Company
Kelly Manufacturing Company makes RC Allen flight instruments for general aviation aircraft. Its main factory is in Wichita, Kansas, which the company calls the Air Capital of the World. A full sized machine shop in Wichita makes almost all of the parts that go into its instruments, which gives the company full control over quality.
The company also runs a facility in Grenola, Kansas. The Grenola site mirrors the Wichita capabilities and adds a metal die casting department, which makes the rugged cast frames used in its instruments. Both facilities hold an FAA certified repair station, where the company handles all warranty repairs and service on RC Allen instruments.
The RCA8310 is two instruments in one. It can work as a turn coordinator or as a turn and bank indicator, and it comes in 3 inch and 2 inch sizes. The RCA2610 digital attitude indicator and the Mini6 integrated six pack instrument are also part of the range. The Mini6 fits a standard panel cutout.
The RCA1510 digital heading indicator shows magnetic heading, GPS ground track, or both at once. It uses an internal magnetometer and an optional internal GPS receiver. It needs no special connections, has a quick set heading bug, works on multiple voltages and offers optional battery backup.
Each digital instrument is described on the site as fully FAA certified, with a two year limited warranty. The RCA8310 and Mini6 include internal battery backup, and the RCA8310 is totally self contained and easy to install. The Mini6 uses reliable solid state components and offers a customizable display.
Kelly Manufacturing sells through distributors around the world, and the company can help customers choose the right instrument for their aircraft. The site has pages for attitude indicators, directional indicators, turn indicators, and tachometers and more, along with support, downloads and a feedback form.
Services
- RCA8310 digital turn coordinator and turn and bank indicator
- RCA1510 digital heading indicator
- Mini6 integrated digital six pack
- RCA2610 digital attitude indicator
- Attitude indicators
- Directional indicators
- Turn indicators
- Tachometers and gauges
- FAA certified repair station service
- Warranty repair and service
- FAA Part 145
Location
555 S. Topeka, Wichita, KS 67202, USA
Open in maps ↗More companies in Kansas, North America, United States
Shows where Kelly Manufacturing Company exhibits or has exhibited
All aviation events- 2
- events
- 2
- countries
- 0
- as sponsor
View eventSUN 'n FUN Aerospace Expo
Exhibited in 2026. Next edition 6 to 11 April 2027 · Lakeland, United States
Stand D-018 (2026)2026 list; 2027 not published yet
View eventAERO Friedrichshafen
Exhibited in 2026. Next edition 14 to 17 April 2027 · Friedrichshafen, Germany
Stand A5-102 (2026)2026 list; 2027 not published yet
From the organisers’ published exhibitor and sponsor lists.
Companies exhibiting at the same events
Directory companies that exhibit at the same shows as Kelly Manufacturing Company, most shared events first.
Similar aircraft avionics

C&L Aviation Group
VerifiedFeaturedAircraft Avionics · Maine
Regional and corporate aircraft parts, MRO, avionics and engines from Bangor, Maine
View company
Aviation Parts Executive, Inc.
VerifiedAircraft Avionics · Florida
New, exchange and rotable aircraft parts from Fort Lauderdale, since 1998
View company
9er Systems
Aircraft Avionics · United States
9er Systems is an aviation audio company in Knoxville, Tennessee. It makes adapters that connect aviation headsets to computers, and parts for real aircraft panels.
View company
A.I.R.S.
Aircraft Avionics · United States
Radio, instrument and avionics repair station near Miami since 1989
View company






