
BRS Aerospace
Whole aircraft recovery parachute systems with over 37,500 delivered
About BRS Aerospace
BRS Aerospace makes whole aircraft recovery parachute systems in Pinebluff, North Carolina. A system can lower an entire aircraft to the ground after a loss of control, a structural failure or another in-flight emergency.
The company was founded in 1980 as Ballistic Recovery Systems. Its founder survived a 400-foot fall in a partly collapsed hang glider in 1975. He then invented the whole aircraft recovery parachute system. BRS says its systems have saved over 515 lives. It has more than four decades of design and engineering work alongside aircraft makers.
BRS worked with Cirrus Aircraft on the first recovery parachute system used on a line of type certified aircraft. The system first went on the Cirrus SR20, followed by the Cirrus SR22 in 2001.
The company has developed and certified FAA and EASA Part 23 systems for the Cessna 172, Cessna 182, Bristell B23, Elixir and Tecnam P-Mentor, with more coming. It says its system is the only whole aircraft parachute certified as a retrofit for the Cessna 172 and 182.
BRS has developed and qualified installations for more than 450 aircraft models. They include ICON, Blackwing, FK, Lancair, KitFox, CubCrafters, Glasair, Comco Ikarus and Zenair. Many other experimental and light-sport aircraft around the world also use it.
The system works in four steps. A rocket fires the parachute out of the aircraft. The chute is pulled far away from the aircraft. A speed-sensing slider controls the timing of the opening. The parachute then lowers the aircraft gradually to the ground.
Pilots describe using the system in real emergencies. One deployed it at 1,500 feet after the engine stopped and landed in the ocean. Another deployed it at 500 feet when smoke filled the cockpit. The company is ISO 9001:2015 certified.
Services
- Whole aircraft recovery parachute systems
- Retrofit parachute systems for Cessna 172 and 182
- Parachute installations for experimental and light-sport aircraft
- Rebuild service
- Customer support
- ISO 9001
Location
Pinehurst, United States
Open in maps ↗More companies in United States, North America
Shows where BRS Aerospace exhibits or has exhibited
All aviation events- 1
- event
- 1
- country
- 0
- as sponsor
View eventSUN 'n FUN Aerospace Expo
Exhibited in 2026. Next edition 6 to 11 April 2027 · Lakeland, United States
Stand D-053, D-054 (2026)2026 list; 2027 not published yet
From the organisers’ published exhibitor and sponsor lists.
Companies exhibiting at the same events
Directory companies that exhibit at the same shows as BRS Aerospace, most shared events first.
Similar manufacturers

3Chem Corporation
Manufacturers · Oklahoma
Aircraft paints and coatings made in Oklahoma, sold worldwide
View company
3D Composites, LLC
Manufacturers · United States
3D printing and composite parts services near Seattle
View company
3G Shielding Specialties
Manufacturers · United States
EMI and RF shielding products for electronics, made in Florida
View company
3H Communication Systems
Aviation Telecommunication · California
3H Communication Systems is a wireless infrastructure and microwave company in Irvine, California. It designs and makes RF and microwave filters and other front-end products.
View company






