
A&A Coatings
Thermal spray coatings and applications in South Plainfield, New Jersey
About A&A Coatings
A&A Coatings is a thermal spray coating company in South Plainfield, New Jersey, in the United States. It has worked in thermal spray since 1944, more than 70 years. The plant is set up only for coating work. It applies metal, ceramic, cermet and hardfaced coatings to parts that wear out too fast. Grinding, finishing and machining happen in the same building, so a part stays in one shop from start to finish.
Coating services
A&A uses four main thermal spray processes:
- HVOF (High Velocity Oxygen Fuel): a dense coating with a strong bond, for parts that face wear and rust at the same time.
- Metalizing: flame spray and arc spray, a lower cost choice for large parts and high volume work.
- Plasma spray: very high heat that can spray ceramics and high temperature alloys, used for heat barriers and electrical insulation.
- Spray and fuse hardfacing: the alloy is fused to the part for a metal-to-metal bond, built for extreme wear.
Coating materials include tungsten carbide, chromium carbide, nickel and cobalt alloys, ceramics, molybdenum, copper, aluminum and steels. Uses include wear and corrosion protection, thermal barriers, electrical insulation and hard chrome replacement.
Repair, machining and own coatings
Most jobs fall into three groups. Repair builds a worn shaft or roller back to size. Prevention coats a new part so it lasts longer. Sizing saves a part that was machined too small. The shop offers grinding, lapping, roll grinding, undercutting and finishing. This lets A&A extend the life of critical parts and save mismachined parts.
The company has also made its own coatings for certain industries. These include A706 for printing, MicroCoat for semiconductors, Cerami-Pak for packaging and Wirewear for wire drawing. It holds 3 patented coatings.
Industries served
A&A serves aerospace and rotorcraft, defense and military, electronics and semiconductors, and marine. It also works for automotive, oil and gas, power and energy, mining, printing, pulp and paper, pumps and valves, and many other industries.
Approvals and award
- Approved to supply a range of coatings for the U.S. Department of Defense.
- Facility certified by the U.S. Navy to MIL-STD-1687A, the Navy's thermal spray standard.
- Quality system written to MIL-I-45208 and audited by government agencies and prime contractors.
- U.S. Department of Defense Manufacturing Technology Achievement Award, for work on the Virginia Class Submarine bow plane system.
Contact
Email: sales@thermalspray.com
Quote requests get a reply the same business day. A drawing or photo of the part helps.
Location
2700, South Clinton Avenue, Samptown, South Plainfield, Middlesex County, New Jersey, 07080, United States
Open in maps ↗More companies in United States
Similar manufacturers

3Chem Corporation
Manufacturers · Oklahoma
Aircraft paints and coatings made in Oklahoma, sold worldwide
View company
3D Composites, LLC
Manufacturers · United States
3D printing and composite parts services near Seattle
View company
3G Shielding Specialties
Manufacturers · United States
EMI and RF shielding products for electronics, made in Florida
View company
3H Communication Systems
Aviation Telecommunication · California
3H Communication Systems is a wireless infrastructure and microwave company in Irvine, California. It designs and makes RF and microwave filters and other front-end products.
View company