FLYeasy’s Embraer E190s spotted at Jordan (Satellite Imagery)

16 Monday Nov 2015

Posted by theflyingengineer in Air Costa, Airline, Flyeasy

Tags

217, 233, Air, Costa, E190, Embraer, flyeasy, Image, JorAMCO, Jordan, MSN, Satellite

Jordan Ammam Queen Alia Airport AMM

Saudi Arabian airline Nas Air, which was later re-branded as Flynas, operated 6 110 seat Embraer E190LRs and 4 118 seat Embraer E195s, but ceased operations of the regional jet a while ago, as the airline transitioned to an Airbus A320 fleet. Of the six E190s, all leased from GECAS, two aircraft, with manufacturer serial number (MSN) 217 and 233 were reportedly to be leased to Bengaluru based FLYeasy, which is yet to obtain its Air Operator Permit (AOP).

Google Earth satellite imagery dated 15th September 2015 of the Jordan Aircraft Maintenance Company (JorAMCO) facility (see the highlighted portion in the image above) at the Queen Alia International Aiport at Jordan’s capital Ammam shows two Embraer E190 aircraft painted in what definitely appears as Flyeasy’s livery. Earlier satellite imagery dated 17th June 2015 shows one E190 in Nasair colors, and one E190 in Flyeasy’s colors parked at the JorAMCO facility.

The Flyeasy livery is very evident in the images, with the dark green winglets, dark green engines, and the dark green paint that follows the vertical stabiliser down to the bottom of the fuselage.

Air Costa’s 112 seat E190 registered VT-LBR, leased from GECAS, today flew into JorAMCO for scheduled maintenance.

Below are zoomed in images of the aircraft, and below that the embedded map. Please click on the image to view in full resolution.
Flyeasy E190 at JorAMCO Jordan

Below is the map:

AirAsia India starts 3 aircraft operation

18 Thursday Dec 2014

Posted by theflyingengineer in AirAsia India, Airline

≈ Leave a comment

Tags

3, 5824, 9M, Air, aircraft, AQW, Asia, India, MSN, Red, VT

AirAsia India made two firsts for itself in a span of two days. On 17th December, it started operating to Pune, connecting Pune to Jaipur. The airline operated its first non-immediate base return point to point route, with Bangalore-Pune-Jaipur-Pune-Bangalore. Although AirAsia India CEO Mittu told The Financial Express that “This is the first time we will be having a hopping flight“, the airline does not offer a Bangalore-Jaipur booking with Pune as a stop (hop). The flight number changes from 1424 to 3424 and 3425 to 1425. AirAsia today is the only airline to offer a direct flight between Pune and Jaipur.

On 18th December, the airline started operating with its third aircraft : VT-RED, which is an A320-216SL with MSN 5824. The aircraft is a 1 year old airplane from AirAsia Berhad, which operated the aircraft as 9M-AQW. This is AirAsia India’s second used aircraft, and on account of its age, the oldest aircraft in the fleet. The average fleet age now stands at 10 months.

VT-RED flew in from Hyderabad at 00:40IST on 18th December. VT-RED breaks the VT-AT* series that the airline had hoped to continue. Reportedly, this is in line with AirAsia’s move across the group to focus on a ‘red’ theme. AirAsia Berhad changed its radio call sign from ‘Asian Express’ to ‘Red Cap’ on 16th November, 2014. It is believed that AirAsia India’s radio call sign ‘Ariya’, may be changed to something that includes ‘red’.

On the same day – 18th November- the airline introduced its second direct Jaipur service from Bangalore. Jaipur’s timings now support the business traveller in offering a same day return.

Presently, the airline intends to fly these three patterns, as shown below. However, with three pairs of simultaneous departures out of Bangalore, the airline may swap blocks of flights between the patterns. For example, the 13:15 Goa departure in Pattern 1 (cell in yellow) may be swapped with the 13:15 Pune departure in Pattern 3. Pune’s timings vary on Saturdays and Tuesdays.

Performance and Outlook

AirAsia India seems to have indefinitely dropped its Chennai early morning flight. The airline has been grappling with numerous delays in its operations, believed to have been caused by its shortage of senior cabin crew. The start of Pune operations on the 17th without the third aircraft proved to have heavily disrupted the airline’s schedule on the day, with delays as much as five hours.

For the month of November, the airline had the second highest cancellation rate of 2.65%, which trailed SpiceJet – an airline that was riddled with numerous cancellations. Delays, which were very pronounced in November, and spills into December, resulted in 1,451 passengers being affected last month – the 4th highest in the industry. 225 passengers were affected by the airline’s cancellations. Considering the airline flew 61,000 passengers in November – a drop of 5,000 passengers from October – the percentage of affected passengers are significantly high.

Load factors at AirAsia India rose by 3.6% compared to October, to 79.8% in November. While this may seem encouraging, it must also be borne in mind that the airline deployed a lower capacity in November, due to cancellations. In November, the airline flew 10,173 lesser seats, resulting in a seat capacity drop of 11.7% compared to October. Part of the high load factors may be explained through the servicing of affected passengers by re-booking them on another flight. Clubbing of flights, like at SpiceJet lead to misleadingly high load figures.

Based on AirAsia India’s past behaviour, it seems unlikely that the airline will launch either a new route or induct a new aircraft by the end of calendar year 2014. The year may end with three airplanes and seven destinations.

However, the airline has been the most unpredictable in the country’s history, with ”Anything can happen’ gaining prominence over ‘Now Everyone can Fly’.

Second Airbus A320 for AirAsia India; Tony hints at AOP

05 Monday May 2014

Posted by theflyingengineer in Operations

≈ Leave a comment

Tags

6096, A320, Air, AOP, Asia, India, MSN, Second, Tony

Tony hints at AirAsia India obtaining its AOP this week.

Note: Partly Speculative article about second aircraft and timelines, based on factual evidence.

AirAsia India presently has only one Airbus A320 airplane- An A320-216SL, registered VT-ATF, with line number 6015. A second Airbus A320, MSN 6096, is painted in the AirAsia scheme, bears the Indian flag, but may be registered 9M-AJM. (Malaysian registration).

This is very likely the second Airbus A320 to join the AirAsia India fleet, but the AirAsia group may have opted to temporarily induct it into the Berhad arm in light of the uncertainties and delays associated with obtaining the Air Operator Permit, or AOP, and later transfer it to AirAsia India once the AOP is received.

AirAsia India, however, successfully completed its proving flights on May 02, 2014, and is expected to receive its AOP very soon.

Tweeted Tony, today, “I think huge week for Airasia. I feel that Airasia India will be approved very soon.” (sic).

This contrasts Tony’s low mood almost a month ago, at Hong Kong, where he stated, “I have never experienced this in my life, where the entire aviation industry has tried to block us. We have been sued and taken to court by every person I know”

After the AOP is received, which is expected this week(and latest by May 15th, 2014), the airline will have to get its schedule approved by the DGCA, after which the airline can be officially “launched”, with the sale of tickets. This may happen towards end-May or the first week of June, and operations may commence either late June or early July, or as late as August, based on the airline’s sales campaign strategy.

The airline is expected to start operations with three airplanes. The new A320, if made to join the AirAsia India fleet, may do so in mid-May 2014.

Read in detail about the two day long proving flights: Day01, Day02.

Airborne! Air Asia India’s first aircraft (A320-216SL MSN6015 VT-ATF)

21 Friday Mar 2014

Posted by theflyingengineer in General Aviation Interest, Operations

≈ 2 Comments

Tags

6015, Air, aircraft, arrival, Asia, ATF, Chennai, ferry, First, Flight, India, MSN, toulouse, VT

Air Asia India’s first aircraft, Airbus A320-216SL, registered VT-ATF (MSN 6015), has finally departed Toulouse (ICAO: LFBO, IATA: TLS) for its final destination Chennai (ICAO: VOMM, IATA: MAA). The ferry flight will however make one stop at Ankara’s (Turkey) Esenboğa International Airport (LTAC).

The aircraft is expected at Chennai at 09:30hrs IST (UTC+05:30) on 22nd March 2014. The callsign is the aircraft’s registration, VT-ATF.

The ferry flight is finally taking place after 9 days, due to issues the airline had with the DGCA that prevented it from ferrying it on the 12th of March 2014, as covered earlier here.

The 9 day delay will have an effect on the start of operations. With this aircraft, the airline can undertake the last hurdle in the grant of the AOP: Route proving flights. With the AOP expected in April, operations may start either late May or early June. The airline can start selling tickets only after the AOP is granted and flight schedules approved. No information is yet available on the second aircraft, which is reportedly planned to be registered as VT-ATB.

The aircraft taxied out at 16:15 hrs UTC, line up on runway 14R at Toulouse at 16:19hrs UTC, started take off roll and was airborne at 16:26 hrs UTC. (21:56hrs IST)

The aircraft’s MODE-S transponder’s ICAO 24 bit unique aircraft address’ Hexadecimal code is 800B09. The ferry flight was assigned a squawk (transponder) code of 4041 by Toulouse, which is subject to change as it passes through different flight information regions.

Updates

Update18: Aircraft landed at 0400hrs UTC (09:30hrs IST), with a 0 minute delay, on runway 25, Chennai. Exited via taxiway F. Water cannon salute to be followed by flag waiving. Flight time LTAC-VOMM 06:43hrs.

Update17: Aircraft begins descent from FL390 at 140NM from MMV, at 0316hrs UTC

Update16: Aircraft leaves Mumbai flight information region and enters Chennai FIR at 0243hrs UTC.

Update15: Aircraft enters Indian mainland over the western Indian coast, over the coastal town of Guhagar, 215km south of Mumbai, Ratnagiri district of Maharastra, at 0231hrs UTC.

Update14: Aircraft is in Mumbai FIR, waypoint PARAR, at ~0115hrs UTC. Another 1.5hrs to the Indian coast. Squawk is 1101.

Update13: Aircraft refuels, and departs Ankara’s Esenboğa International Airport, airborne at 2117hrs UTC. Spends total 01:19hrs on ground including taxi in/out. Squawk 2514.

Update12: Established ILS for 03R at 1955hrs UTC. Aircraft landed on runway 03R at Ankara’s Esenboğa International Airport (IATA: ESB, ICAO: LTAC) at 1958hrs UTC. Expected time on ground 30 minutes. 03:32hr flight concludes stage one of the ferry. Route is shown in image above.

Update11: Aircraft begins descent from FL390 at 1935hrs UTC, ~100NM from Ankara.

Update10: Aircraft enters Turkish Airspace at waypoint RIXEN at 1918hrs UTC!

Update09: Aircraft enters Bugarian airspace at 1839hrs UTC.

Update08: Aircraft brushes past the northern tip of Montenegro, and enters Serbian Airspace at 1817hrs UTC.

Update07: Aircraft enters Bosnia and Herzegovina at 1803hrs UTC

Update06: Aircraft crosses over into Croatian Airspace at 1747hrs UTC.

Update05: Aircraft leaves Italian Coast at 1742hrs UTC. Winds slow acft down to 438kts G/S.

Update04: Crew witness twilight over San Marino, Italy, at 1736hrs UTC.

Update03: Aircraft crossed into Italian Airspace at 1702UTC, 466kts, FL390. Squawk changed to 1212.

Update02: Aircraft step climbed and reached FL390 at 1649hrs UTC.

Update01: Aircraft is cruising at FL340 and maintaining a ground speed of 466kts.

Airbus A320NEO Enters FAL (MSN6101)

19 Wednesday Mar 2014

Posted by theflyingengineer in Manufacturer, Technical

≈ 1 Comment

Tags

271N, 6101, A320, Air Asia, Assembly, Boeing, CSeries, E2, Efficiency, EJets, FAL, Final, First, Fuel, Go Air, Indigo, LEAP-1A, Line, MAX, MSN, NEO, PW1100G

Airbus’ first A320NEO, MSN 6101 (A320-271N) has entered the final assembly line (FAL) at Toulouse, marking yet another milestone in the A320NEO program. The forward fuselage, which arrived from St. Nazaire in France, and the aft fuselage, which arrived from Hamburg in Germany, were mated at the FAL, marking the start of the final assembly.

The next stage is the joining of the wing to the fuselage. Overall, it takes about one month to complete the final assembly of an A320 Family aircraft.

The A320 program crossed a major milestone in November 2013, when the assembly of the first major component- the engine pylon- took place.

First flight is expected in the Autumn of 2014, almost 4 years after the program was launched in December 2010. Airbus took the landmark decision of re-engining the A320 Family after sensing imminent competition from Bombardier’s C-Series airplanes.

Airbus will retain 95% airframe commonality with the present A320, offering the benefit of high dispatch reliability associated with a mature airframe. Airbus has also effected incremental changes to its traditional Airbus A320, thereby eliminating the risks associated with too many modifications in one shot.

In the November of 2011, Airbus flew the first A320 with the version of the sharklets that are now seen on all new production Airbus A320 airplanes, first sharklet-equipped A320 being MSN 5428 delivered in December 2012. The sharklets, which will feature on the A320NEO as well, introduce fuel savings of upto 4% on long flights. Preliminary wing strengthening to handle the aerodynamic loads introduced by the sharklets, and airplane-wide weight reduction to offset the weight due to the strengthening have already been effected.

NEO’s difference from today’s in-production A320 aircraft is the further strengthening of the wing and fuselage to handle the loads associated with the heavier and larger New Engine Option (NEO): The Pratt and Whitney PW1100G and the CFM LEAP-1A. The new more efficient engine together with the sharklets realize a 15% fuel savings on 800nm route lengths, and up to 16%+ on the longer routes, compared to non-sharklet fitted Airbus A320 aircraft.

The Pratt and Whitney Geared Turbofan Engine PW1100G series for the A320, took to the skies in May 2013, on a Pratt and Whitney Boeing 747SP flying test bed.

Changes to the A320 are minimal and the least among other airplanes which are being re-engined and modified to a larger extent, such as the Boeing 737MAX and the Embraer Second Generation E-Jets E2. Historically, all new airplane programs have been met with significant dispatch reliability issues related to technical or maintenance issues associated with an immature airframe. The A320NEO program has the least changes, followed by the MAX and E2 program. The all-new Bombardier C-Series introduces many firsts for Bombardier, making it the program that may likely have the most number of issues, initially atleast: a reason which explains the low number of firm orders: 201, despite having 3 flying airplanes in the test campaign.

In contrast, the Embraer E-Jet E2 program, which airplanes are still “paper” (conceptual), has 200 firm orders. The Boeing 737MAX has 1,807 firm orders and the Airbus A320NEO program has firm orders for 2,667 airplanes.

Least changes with benefits where it matters to an already proven and mature airframe, incremental modifications, early introduction into service (Q4 2015), a dual engine source (all other new/re-engine programs have only one engine supplier), keeping up program development schedule, and the smallest training impact have contributed in large to the sales success of the program.

IndiGo has an order for 180 Airbus A320NEO Family aircraft, which include the A320NEO and A321 NEO. Go Air has 72 airplanes on order, and Air Asia 264 A320NEOs on order. Both IndiGo and GoAir’s A320NEOs will be powered by the Pratt & Whitney PW1100G. IndiGo operates the IAE engines, of which Pratt and Whitney is a part. Go Air which flies CFM powered A320 aircraft, has switched engine suppliers, to Pratt and Whitney. The PW1100G engines offer two advantages: Room for growth, and availability sooner than the CFM LEAP-1A Engines. Air Asia, which flies CFM powered A320s, has opted for the CFM LEAP-1A to power its NEOs.

The 3rd A350: “Carbon” signature livery: On track for the 2014 Q4 EIS

03 Friday Jan 2014

Posted by theflyingengineer in General Aviation Interest, Manufacturer

≈ Leave a comment

Tags

2, 2014, A350, Airbus, Carbon, F-WWCF, Flights, MSN, Passenger, Q4, Qatar, Signature

The Airbus A350 program seems to be on track for the planned 12 month certification program, and the planned entry into service (EIS) in what was earlier reported by Airbus as the “second half of 2014”, and now, more precisely, “Q4 2014”; On Thursday 2nd January 2014 Airbus rolled-out its third A350 XWB flight-test aircraft, MSN2, from the paint shop in Toulouse.

The rolling out of the A350 fitted with a cabin was well timed: January 1st 2014 marked 100 years since the first scheduled commercial airline flight took off, with just one passenger, from St-Pertersburg, Florida, to Tampa, Florida, in a flight that lasted just 23 minutes.

The first A350 to enter commercial service will be for Qatar Airways.

This aircraft, F-WWCF, is the first of two A350 flight test aircraft to be equipped with a full passenger cabin interior, and features a distinctive “Carbon” signature livery to reflect its primary construction from advanced materials. 53% of the A350 XWB’s airframe is made-up of carbon-fibre reinforced polymer (CFRP) including Airbus’ first carbon-fibre fuselage.

The other aircraft to be fitted with a cabin will be MSN 5, which is in the final assembly line and is expected to fly in a few months. MSN 1, 3 and 4 are dedicated to avionics, noise testing, and various other systems work through the flight test program. These three aircraft will not be fitted with a cabin, but rather, equipped with heavy flight test installation.

MSN2 will join the A350 XWB flight test fleet in the coming weeks and will be the first A350 to transport passengers when it undertakes the Early Long Flights (ELF) later in the year. The “passengers” will be Airbus employees.

Airbus A350 MSN 5 enters FAL

06 Wednesday Nov 2013

Posted by theflyingengineer in Manufacturer

≈ Leave a comment

Tags

5, A350, Airbus, Assembly, cabin, Campaign, Flight, MSN, Production, Program, test

Airbus states that the assembly of MSN5, the fifth and final member of the A350 XWB flight test fleet in the test flight campaign is now underway with the fuselage joining process. This follows the recent arrival of the three fuselage sections at the A350 XWB final assembly line (FAL) in Toulouse, France.

MSN5 is the second of the A350 flight test aircraft that will feature a passenger cabin. MSN 2 and MSN 5 will have the cabin fitted, where Airbus will put passengers on board, with cabin crew. It is for the first time in the history of Airbus that so early in the campaign 2 aircraft have been dedicated to the cabin. Earlier, aircraft would be dedicated about 2 months before the entry into service. Associated with that are delays, a lot of complaints from passengers, and a difficulty of entry into service. This was witnessed in the A320 and the A340 programs.

This aircraft will fly for the first time in Spring 2014 and will be used essentially to perform cabin related flight tests. It will also participate in the Early Long Flights where the “passengers” are Airbus employees. This allows the cabin and related systems to be submitted to near realistic operations in order to ensure a mature cabin at entry into service. In addition, MSN5 will carry out Route Proving flights to demonstrate to the certification authorities that the aircraft performs perfectly in airport operations.

To date the two A350 XWB test aircraft, MSN1 and MSN3 have clocked up over 500 flight test hours in more than 100 test flights. The A350 XWB has already won more than 760 firm orders from 39 customers worldwide. First delivery will be to Qatar Airways in the second half of 2014.