Tags

, , , , , , , , , , , ,

737_A320NEO_E175Perf

Three jetliner manufacturers, Airbus, Boeing and Embraer, in alphabetical order, rolled out single aisle firsts in March this year.

It started on March 12th, when Embraer rolled out the first production E175 with fuel burn improvements. New winglets, and fuselage wide aerodynamic “cleanups”, and system optimizations have bettered fuel consumption by 6.4%: a good 1.4% better than the technical team had expected to see in fuel savings, on a “typical flight”, which, according to The Flying Engineer estimates, are in the 500-1000NM region. This 6.4% fuel burn reduction is close to double the figure Airbus achieved with its A320 when it strapped on the winglets it calls Sharklets: between 3-4%, and more than 3 times what Boeing achieved with its 737NG when it rolled out the 737 Performance Improvement Package (PIP) in 2012: 2%.

On March 17th, Airbus announced the final assembly of its A320NEO: the next landmark in mainline single aisle airplanes. The A320NEO will be the first single aisle airplane in its class to enter service, with a new type of engine in this thrust class: the Geared Turbofan Engine. The GTF is expected to set the A320NEO apart from the 737MAX; the latter is expected to fly with the CFM LEAP-1B engine that runs hotter, leaving little room for any engine growth in the future.

On March 20, Boeing rolled out the first Boeing 737NG at increased production rate: 42 airplanes a month, matching what Airbus had achieved almost a year ago: which then was the highest commercial aircraft monthly production rate ever. The interesting feat here is that Boeing achieves this at a single facility, while Airbus gets its 42 airplanes a month at its three final assembly lines: Toulouse, Hamburg, and Tianjin.

As for Bombardier, which is going through a very difficult period, the First CS300: the only aircraft variant in the CSeries program that is relevant today and has garnered much attention from customers, almost twice the firm orders as the shorter variant, the CS100, is in final assembly and the systems are being installed. First flight of the CS300 is expected soon, and the entry into service of the CS300 is expected 6 months after the CS100, the latter slated for the second half of 2015, with the hope that no further program delays are announced.